Makita 5621RD Instrukcja Obsługi Pobierz pdf (Strona 5)

ENGLISH

Explanation of general view

1 To avoid kickback, do support

board or panel near the cut.

2 Don’t support board or panel

away from the cut.

3 A typical illustration of proper

hand support and workpiece

support.

4 Push button

5 Battery cartridge

6 Charging light

7 Battery charger

8 Loosen (counterclockwise)

9Hex wrench

10 Shaft lock

11 Bolt

12 Outer flange

13 Saw blade

14 Inner flange

15 Hex socket head bolt

16 Cutting depth

17 Lever

18 Bevel scale plate

19 Clamp screw

20 Adjusting screw

21 Base

22 Triangular rule

23 For straight cuts

24 Cutting line

25 For 45° bevel cuts

26 Switch trigger

27 Lock-off button

28 Clamp screw

29 Rip fence (Guide rule)

30 Dust nozzle

31 Screws

32 Hose 28 mm in inner dia.

33 Vacuum cleaner

34 Limit mark

35 Brush holder cap

36 Screwdriver

SPECIFICATIONS

Model 5621RD

Blade diameter ................................................... 165 mm

Max. cutting depth

At 90° ................................................................. 54 mm

At 45° ................................................................. 38 mm

No load speed (min

-1

) ............................................. 2,600

Overall length ..................................................... 364 mm

Net weight .............................................................. 3.8 kg

Rated voltage ....................................................D.C.18 V

• Due to our continuing program of research and devel-

opment, the specifications herein are subject to change

without notice.

• Note: Specifications may differ from country to country.

Safety hints

For your own safety, please refer to the enclosed safety

instructions.

IMPORTANT SAFETY INSTRUCTIONS FOR

CHARGER & BATTERY CARTRIDGE

ENC001-3

1. SAVE THESE INSTRUCTIONS — This manual

contains important safety and operating instruc-

tions for battery charger.

2. Before using battery charger, read all instruc-

tions and cautionary markings on (1) battery

charger, (2) battery, and (3) product using bat-

tery.

3. CAUTION — To reduce risk of injury, charge only

MAKITA type rechargeable batteries. Other types

of batteries may burst causing personal injury

and damage.

4. Do not expose charger to rain or snow.

5. Use of an attachment not recommended or sold

by the battery charger manufacturer may result

in a risk of fire, electric shock, or injury to per-

sons.

6. To reduce risk of damage to electric plug and

cord, pull by plug rather than cord when discon-

necting charger.

7. Make sure cord is located so that it will not be

stepped on, tripped over, or otherwise subjected

to damage or stress.

8. Do not operate charger with damaged cord or

plug — replace them immediately.

9. Do not operate charger if it has received a sharp

blow, been dropped, or otherwise damaged in

any way; take it to a qualified serviceman.

10. Do not disassemble charger or battery cartridge;

take it to a qualified serviceman when service or

repair is required. Incorrect reassembly may

result in a risk of electric shock or fire.

11. To reduce risk of electric shock, unplug charger

from outlet before attempting any maintenance

or cleaning. Turning off controls will not reduce

this risk.

12. The battery charger is not intended for use by

young children or infirm persons without super-

vision.

13. Young children should be supervised to ensure

that they do not play with the battery charger.

14. If operating time has become excessively

shorter, stop operating immediately. It may result

in a risk of overheating, possible burns and even

an explosion.

15. If electrolyte gets into your eyes, rinse them out

with clear water and seek medical attention right

away. It may result in loss of your eyesight.

ADDITIONAL SAFETY RULES FOR CHARGER

& BATTERY CARTRIDGE

1. Do not charge Battery Cartridge when tempera-

ture is BELOW 10°C (50°F) or ABOVE 40°C

(104°F).

2. Do not attempt to use a step-up transformer, an

engine generator or DC power receptacle.

3. Do not allow anything to cover or clog the

charger vents.

4. Always cover the battery terminals with the bat-

tery cover when the battery cartridge is not

used.

5. Do not short the battery cartridge:

(1) Do not touch the terminals with any conduc-

tive material.

(2) Avoid storing battery cartridge in a container

with other metal objects such as nails, coins,

etc.

(3) Do not expose battery cartridge to water or

rain. A battery short can cause a large cur-

rent flow, overheating, possible burns and

even a breakdown.

1 2 3 4 5 6 7 8 9 10 ... 71 72

Komentarze do niniejszej Instrukcji

Brak uwag

Makita 5621RD Instrukcja Obsługi Strona 5

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Elektronarzędzia Makita 5621RD